-
It has come to the attention of forum staff that Dollshe Craft has ceased communications with dealers and customers, has failed to provide promised refunds for the excessive waits, and now has wait times surpassing 5 years in some cases. Forum staff are also concerned as there are claims being put forth that Dollshe plans to close down their doll making company. Due to the instability of the company, the lack of communication, the lack of promised refunds, and the wait times now surpassing 5 years, we strongly urge members to research the current state of this company very carefully and thoroughly before deciding to place an order. For more information please see the Dollshe waiting room. Do not assume this cannot happen to you or that your order will be different.Dismiss Notice
-
Dollshe Craft and all dolls created by Dollshe, including any dolls created under his new or future companies, including Club Coco BJD are now banned from Den of Angels. Dollshe and the sculptor may not advertise his products on this forum. Sales may not be discussed, no news threads may be posted regarding new releases. This ban does not impact any dolls by Dollshe ordered by November 8, 2023. Any dolls ordered after November 8, 2023, regardless of the date the sculpt was released, are banned from this forum as are any dolls released under his new or future companies including but not limited to Club Coco BJD. This ban does not apply to other company dolls cast by Dollshe as part of a casting agreement between him and the actual sculpt or company and those dolls may still be discussed on the forum. Please come to Ask the Moderators if you have any questions.Dismiss Notice
Difference between revisions of "Sealant"
From Den of Angels BJD Wiki
m (→Resources) |
(→Resources) |
||
| (8 intermediate revisions by 2 users not shown) | |||
| Line 1: | Line 1: | ||
| − | + | Sealing refers to the act of spraying a transparent, matte finish surfacing spray over the face or body of a ball-jointed doll. This sealant can be applied before, during and after the process of creating a [[faceup]] to seal the paint or to protect the doll from UV radiation. A base sealant spray is almost always used to protect the doll from staining. | |
| − | == | + | ==Sealant brands== |
| − | Common brands | + | Common brands that are recommended for their use with dolls include: |
| − | *[[Volks]] Zoukei-Mura Finishing Powder Spray (UV-Cut or regular) | + | |
| − | *Mr. Super Clear Flat (UV-Cut or regular) | + | :* [[Volks]] Zoukei-Mura Finishing Powder Spray (UV-Cut or regular) |
| + | :* Mr. Super Clear Flat (UV-Cut or regular) | ||
Some people use these brands for coating their dolls with little or no trouble: | Some people use these brands for coating their dolls with little or no trouble: | ||
| − | + | :* Citadel Matte Purity Seal | |
| − | *Citadel Matte Purity Seal | + | :* Army Painter Matte Spray |
| + | :* Testor's Dullcote | ||
| − | It is important that the spray used has a matte finish, as a glossy finish will give the doll a very | + | It is important that the spray used has a matte finish, as a glossy finish will give the doll a very plastic look. UV-Cut sprays give some protection against the yellowing effect of sunlight on resin, but some people prefer non-UV Cut sprays for ease of use, as they tend to give less trouble when drying. |
==Usage Recommendations== | ==Usage Recommendations== | ||
| − | + | Sealants may not dry properly on humid or cold days, and may leave bubbles or residue on the doll. It is recommended to spray during warm, dry days. It is possible to gently warm (never make them hot) the spray cans or the doll part to be sealed (preferably before adding [[faceup]] or [[blushing]]) to help on less than acceptable climates. | |
For health reasons, it is strongly recommended to spray in an open, airy environment and to use a respirator or mask that filters aerosols. | For health reasons, it is strongly recommended to spray in an open, airy environment and to use a respirator or mask that filters aerosols. | ||
| − | To remove a faceup or blushing sealed with | + | To remove a faceup or blushing sealed with sealant spray, you can use a mild water-based solvent for use with acrylics like Mr. Color Thinner, Winsor & Newton's Brush Cleaner or Tamiya's X20A thinner. 90% Isopropyl Alcohol is also another good option for faceup removal. Acetone or nail varnish remover is heavily discouraged, as it can damage or stain the resin. Always be sure to wash the area afterward to remove any residue. |
==Resources== | ==Resources== | ||
| − | *[https://denofangels.com/threads/all-about-sealants.605416/] | + | :*[https://denofangels.com/threads/all-about-sealants.605416/ All About Sealants] |
| − | + | :*[https://denofangels.com/threads/using-mr-super-clear-in-cold-weather-sealant-tips-for-winter.22940/ Using Mr. Super Clear in Cold Weather: Sealant Tips for Winter] | |
| − | *[ | + | :*[https://denofangels.com/threads/respirators-and-other-safety-tips-for-spraying-sealant.189710/ Respirators and other safety tips for spraying sealant?] |
| − | *[ | + | :*[https://denofangels.com/threads/what-you-need-to-know-about-respiratory-protection.399096/ What you need to know about respiratory protection!] |
| − | *[ | + | |
| − | + | ||
| − | + | ||
| − | + | ||
[[Category:Doll Terms]] | [[Category:Doll Terms]] | ||
Latest revision as of 23:38, 17 October 2023
Sealing refers to the act of spraying a transparent, matte finish surfacing spray over the face or body of a ball-jointed doll. This sealant can be applied before, during and after the process of creating a faceup to seal the paint or to protect the doll from UV radiation. A base sealant spray is almost always used to protect the doll from staining.
Sealant brands
Common brands that are recommended for their use with dolls include:
- Volks Zoukei-Mura Finishing Powder Spray (UV-Cut or regular)
- Mr. Super Clear Flat (UV-Cut or regular)
Some people use these brands for coating their dolls with little or no trouble:
- Citadel Matte Purity Seal
- Army Painter Matte Spray
- Testor's Dullcote
It is important that the spray used has a matte finish, as a glossy finish will give the doll a very plastic look. UV-Cut sprays give some protection against the yellowing effect of sunlight on resin, but some people prefer non-UV Cut sprays for ease of use, as they tend to give less trouble when drying.
Usage Recommendations
Sealants may not dry properly on humid or cold days, and may leave bubbles or residue on the doll. It is recommended to spray during warm, dry days. It is possible to gently warm (never make them hot) the spray cans or the doll part to be sealed (preferably before adding faceup or blushing) to help on less than acceptable climates.
For health reasons, it is strongly recommended to spray in an open, airy environment and to use a respirator or mask that filters aerosols.
To remove a faceup or blushing sealed with sealant spray, you can use a mild water-based solvent for use with acrylics like Mr. Color Thinner, Winsor & Newton's Brush Cleaner or Tamiya's X20A thinner. 90% Isopropyl Alcohol is also another good option for faceup removal. Acetone or nail varnish remover is heavily discouraged, as it can damage or stain the resin. Always be sure to wash the area afterward to remove any residue.
