1. It has come to the attention of forum staff that Dollshe Craft has ceased communications with dealers and customers, has failed to provide promised refunds for the excessive waits, and now has wait times surpassing 5 years in some cases. Forum staff are also concerned as there are claims being put forth that Dollshe plans to close down their doll making company. Due to the instability of the company, the lack of communication, the lack of promised refunds, and the wait times now surpassing 5 years, we strongly urge members to research the current state of this company very carefully and thoroughly before deciding to place an order. For more information please see the Dollshe waiting room. Do not assume this cannot happen to you or that your order will be different.
    Dismiss Notice
  2. Dollshe Craft and all dolls created by Dollshe, including any dolls created under his new or future companies, including Club Coco BJD are now banned from Den of Angels. Dollshe and the sculptor may not advertise his products on this forum. Sales may not be discussed, no news threads may be posted regarding new releases. This ban does not impact any dolls by Dollshe ordered by November 8, 2023. Any dolls ordered after November 8, 2023, regardless of the date the sculpt was released, are banned from this forum as are any dolls released under his new or future companies including but not limited to Club Coco BJD. This ban does not apply to other company dolls cast by Dollshe as part of a casting agreement between him and the actual sculpt or company and those dolls may still be discussed on the forum. Please come to Ask the Moderators if you have any questions.
    Dismiss Notice

More on the Dolpa 14 LEs... more pics and info~

Dec 9, 2005

    1. I'll steal the SD16 coat for Sai if it fits him. Muahah.

      For some reason, I'm really stuck on what to think of his arms. Going by these pictures, the elbows look weird. They remind me of my initial impression of the Bermann elbows. Not bad but.....eh....they just look funny!

      I'll need to see more pictures, for certain. So far, the rock that I'm sticking to that declares 'no SD16 until they are Full Choice' is holding pretty steady.

      A bit off the subject, I'm curious on the bets as to when SD16 will go FCS...
       
    2. that would be awesome!! i'm really curious to see if that could work.. then my F16 will have to wait even longer for a body XD and good luck in getting him ^__^
       
    3. Guh? How are they planning on patenting that? Unless there are some radically new features to his joints that I can't see from the pictures, it all looks like things that have been done before on other BJDs and art dolls, just with a more visually appealing sculpt. I'm confused. :confused:
       
    4. Oh I definitely will. :D I've wanted a Hewitt since back when the 1st edition came out...he's my favorite of all mini type dolls. I'm so happy they are rereleasing him!
       
    5. Am I the only one who really likes the SD16 boy?! I think he's awesome, head to toe! I'd sell Bastian for him, but I'd still not have enough money! (Just don't tell him I said that.)
       
    6. Anne is SO cute, I will definitely be getting her! I've been wanting a cute little Yo-SD girl to carry around with me. :D And I want to get Hewitt too, he is such a sweet looking little boy and I've been trying to get a mini boy for ages.

      Yukinojo's joints are amazing . . . and its nice that he's not too huge. His face isn't to my taste, but my sister's getting him so I'll get to play with him and take lots of pics. :)

      (and yes, we have been saving up for months and selling stuff like mad! LOL)

      I'm so glad they're all made with that special UV protect resin too! I was wondering about that.
       
    7. I haven't had the chance to truly study a Super Dollfie Cute, so tell me if these observations are found in them, too:

      Instead of just being an oval floating joint, the part that connects with the upper arm looks like a ball and socket joint that can rotate, while the bottom is a hinge joint.
      The connection between the hand and the wrist joint seems to be flat.


      (On the subject of Dollfie Dream.... BOOOOOBS! XD)
       
    8. Hewitt! If they have them in LA I *must* have one! I am not sure how well I'd do at the online after event u\\\u
       
    9. The page is up for the Dolls Party 14 Preceding Items, including optional parts for Dollfie Dreams. Now she is even BIGGER !!

      http://www.volks.co.jp/en/event/dollsparty14/items.html

      http://www.volks.co.jp/jp/event/dolpa14/sumikatop.html

      Oddly the english site has more photos up on the wigs, AND the outfits. But the Japanese site has the outfits and accessories shown ON the dolls.
      In the V-Jeans section, there is a great photo of the new F28 head modelling a new outfit:-

      http://www.volks.co.jp/en/event/dollsparty14/items/pre_vjeans.html

      Also wierd is that they use a SD13 Mimi to model an outfit for Mini SDs and SD cutes ?
      Since there are 2 sets of posts about Dollpa14, I've posted in both.
       
    10. I'm with you Amy! I think that Yukinojo it's awesome!!!!!!It's perfect!!!
       
    11. Yay! SD16s will fit with SD13s! I really thought he was going to be as tall as hounds and tower over all other Volks dolls... So he's only 1cm taller than DOTs...

      I love that full pic of him with the trench coat, so smexy! XD
       
    12. Ditto this. Did Shinku get pushed forward to a later Dolpa or something? :(

      Haha, Hewitt's outfit is so quirky and cute. Can't wait to see more photos of it!
       
    13. Her pics weren't showing up at the beginning... maybe Volks changed its mind about releasing her at DP14 because they already had enough dolls?
       
    14. I like the SD16 body, the joints actually look human..the Dollshe joints really turn me off.
       
    15. SDCute arms don't have a funky stick-out elbow hinge ridge ("joint sheet"?) like this SD16 body does. I personally am not a huge fan of stick-out sheet ridges (Yo-SD have them on their knees too, and some types of non-Volks dolls have them), they seem like they could get more easily chipped.

      Too bad those KIPS photos don't show the knees or legs, or their movement range. I'd love to know if they can do all that SDC Arashi can (kneeling, lotus position, "swarrico"), even if they still may not be able to do side splits like CP.

      Does anyone know if Volks is planning on changing the design of their SDs and SD13s to this system as well? Perhaps it is more flexible (they need to show some photos of that, because these ones DON'T show it), but the design doesn't seem as ...refined. I'm not sure what "trouble with posing" they might be referring to on non-"KIPS" bodies, either... maybe less flexibility?

      Yukinojo does look Russian, heh... but I am now itching to take sandpaper to the bottom of his lower lip and make it a bit less large.
       
    16. Did anyone else notice that it says he's wearing Heath's wig? I think that means there's a very good chance that his head is interchangeable with SD13 boys. Now, as to how other heads will look on the body, I suppose we'll have to wait and see, but I'd say more mature looking heads like Heath, Isao, Tohya, and probably Tsukasa will look just fine on it. The only thing I see is that perhaps the neck/neckhole might have to be sanded a little?
       
    17. Sawaragi Looks more like SD25 if anything! @___@;; I love his outfit! >.<
       
    18. I thinks that he isn't wearing Heath's wig, if you see the information in japanese yo will see that says "&#26937;&#26408;&#12288;&#38634;&#20043;&#19998;" (Yukinojo Sawaragi) and not "&#12498;&#12540;&#12473;" what means Heath, well i need Cassiel's help, Cassiel knows japanese right??
       
    19. It doesn't really look like Heath's wig. It was more unruly at the back and didn't have extensions.

      Meanwhile, I looked at the KIPS pics again and noticed how built Yukinojo is:

      [​IMG]

      :P

      (The pic belongs to Volks, I take no credit for Yukinojo and SD16)
       
    20. I'm guessing they aren't going to show extremely detailed pictures on their site because the patent is PENDING..just be patient people.