-
It has come to the attention of forum staff that Dollshe Craft has ceased communications with dealers and customers, has failed to provide promised refunds for the excessive waits, and now has wait times surpassing 5 years in some cases. Forum staff are also concerned as there are claims being put forth that Dollshe plans to close down their doll making company. Due to the instability of the company, the lack of communication, the lack of promised refunds, and the wait times now surpassing 5 years, we strongly urge members to research the current state of this company very carefully and thoroughly before deciding to place an order. For more information please see the Dollshe waiting room. Do not assume this cannot happen to you or that your order will be different.Dismiss Notice
-
Dollshe Craft and all dolls created by Dollshe, including any dolls created under his new or future companies, including Club Coco BJD are now banned from Den of Angels. Dollshe and the sculptor may not advertise his products on this forum. Sales may not be discussed, no news threads may be posted regarding new releases. This ban does not impact any dolls by Dollshe ordered by November 8, 2023. Any dolls ordered after November 8, 2023, regardless of the date the sculpt was released, are banned from this forum as are any dolls released under his new or future companies including but not limited to Club Coco BJD. This ban does not apply to other company dolls cast by Dollshe as part of a casting agreement between him and the actual sculpt or company and those dolls may still be discussed on the forum. Please come to Ask the Moderators if you have any questions.Dismiss Notice
Narin
Narin is a Korean company that was established in 2004 by artist Bimong. The dolls were originally produced using French resin in Snowy White, Pinky White, Golden Beige, and Tanning. The male was Narin, meaning "a child from the sky" and the female Narae, meaning "wings" in traditional Korean. The dolls were produced in 2 sizes, 43/44cm and 60cm.
In the early years Narindolls were offered through Dollmore or directly through Bimong himself. Narindolls were then offered through Dollfair International beginning in 2006.
All dolls yellow but unfortunately, French Resin is more vulnerable to yellowing. As of December 2006 Narindolls added UV Additive to all its dolls to better protect against yellowing. According to Dollfair, Narindolls tested it in direct summer sun in Korea and the damage was minimal. All dolls should be kept away from direct sunlight and heat!
In December 2007, Narindolls introduced a new knee joint in its 43 cm dolls.
In 2008 there was a shortage of French resin which increased waiting times for finished dolls. Dollfair orders #62 through #69 were affected by the French resin shortage. Dollfair even closed ordering for a month to help reduce the backlog. Catrina, owner of Dollfair, spoke French and she met with the CEO of Narindolls and the French company producing the resin. Catrina negotiated an agreement that Narindolls would be given priority for the raw materials.
Also during order #62 there was a problem of breakage with the knee joints. Dollfair and Narindolls worked to resolve the issues to customer satisfaction giving them extra joints or offering the option of the older knee design. Only order # 62 was affected with the problem. Customers requesting the old legs had an even longer wait because those molds had been taken out of production but their issue was resolved.
Many collectors shied away from French resin fearing problems with yellowing so the option of urethane resin was added. The French resin issue was resolved but January 2009 through October 2009 there was a shortage of urethane resin. The resin company that Narindolls dealt with went bankrupt. This created a significant backlog in production. A new CEO was hired for Narindolls and new casting was underway with 2 companies to help with production.
On March 31, 2010 the 5 year contract Bimong had given to his investors expired. Effective 4/1/2010 Dollfair International and Bimong took over production of ALL Narindolls. Dollfair started their own casting company in Ohio.
Customer service through Dollfair initially was good but communication was often sporadic. After taking on production of Narindolls orders were not being fulfilled and customers were unable to contact Catrina. A scandal in 2010 ensued with over 80 outstanding orders. Eventually contact was made with Dollfair and refunds were issued to some but not all customers. Bimong stepped in and personally honored the orders. D-Storic felt it wasn't fair for Bimong to accept all the financial responsibility so they stepped in to honor outstanding orders.
A thread was started to track the outstanding waiting list and the resolution. Narin Waitlist
D-Storic began producing Narin Creative dolls effective Nov 20, 2011. During a large Christmas Event order some dolls experienced warping problems due to an incorrect resin mixture. The resin problems were:
- - distortion of body parts and head
- - softness of resin, even clothes could cause indentations on the body
- - skin irritation after touching the resin
- - strong smell of the resin
During the time D-Storic was producing the dolls there were delayed orders. In addition, other doll companies being produced by D-Storic went out of business. Days before the Christmas Event orders D-Storic announced their contract with Narin Creative ended effective 12/31/2013.
Effective 1/01/2014 all Narin dolls are sold directly through Art-Bimong. Bimong established the following schedule for release:
- Odd Months (1, 3, 5, 7, 9, 11) pre-order for 40cm series Narin & Narae
- Even Months (2, 4, 6, 8, 10, 12) pre-order for 60cm seriesNarin & Narae
In February 2017 Bimong announced the following scheduled line-up for development:
- 65Narin & 60Narae couple
- 40Narin & 40Narae New couple + Classic couple
- Dandelion 51cm New body
- Chuu&Chuubi New body 27cm couple
- Shahti New body 16 inches Fashion Doll
- Other parts/ Animals/ Characters
January 2018 N40 new Narae pre-order included limited edition of 20 N42C head and parts:
- Silicone eyeball fixation device
- Teeth parts & cat ears
- Hand-made Pouch
- Cedar Laser Cutting Certificate
Included limited body parts with Cedar Laser Cutting Certificate
April 2018 was a re-release of Classic Narin 44cm & Narae 42cm Couple. This included upgraded body parts - Double elbow joint silicon pad, Shoulder joint silicone pad, added silicone pad to pelvic joint & neck joint, and added canine-shaped brakes to knee joints. Bimong also released a new skin color - Oriental skin.
On Apr 23 2018 Bimong released the following announcement:
To my precious customers.
19 years have passed since I started making dolls.
I deeply appreciate for your support and encouragement which made me possible to produce beautiful dolls.
For one year starting from the next month, I want to make doll houses and small items preparing for personal exhibition.
The sales for all the dolls produced so far will end after one month(May 15 to 31)
Upgraded classic Narin & Narae, new body, and heads of normal and limited version will not be produced anymore after only two weeks of limited selling period.
That is because the pain in my left hand which got hurt 5 years ago is getting aggravated and making it hard to do some elaborate works.
This decision is also for my dear customers. I think this decision will raise the value of your dolls much more in the passage of time.
100 limited version of bodies and 20 limited version of heads can be out of stock early.
I guess that it will take me about 3 months to set a new workshop and web site.
Prior to that, I want to pour all of my efforts to complete 52cm Dandelion body, 3 facial expressions heads, 3 hand and foot parts.
I will take order for Dandelion, after the completion, copying, and packaging.
Even afterwards, I hope I can work on head, hand, and foot parts, if my hand condition allows.
In the future, I want to focus on scale model production, also studying for wood, metal, leather and glass crafts.
Like always, I will keep communicating by sharing the process in Instagram.
All the previous orders including that of March will be shipped within this week.
If you have any questions, please send them by Instagram DM.
Thanking for your support again.
Best regards Bimong
Contents
Lines
- Narin
- Narae
- Dandelion
- Chuu
Narin
The N40 series Narin classic body has been the same since 2004. Bimong did refresh the molds and updated the knee and elbow joints for the January 2018 release.
- Narin N40 Measurements
- Height - 44cm (including head)
- Head circumference - 6.5"
- Neck circumference - 7cm
- Chest circumference - 16.5cm
- Waist circumference - 13.5cm
- Hip circumference - 19cm
- Wrist circumference - 4cm
- Foot size - 5cm
- Ankle circumference - 5.5cm
- Arm length (from shoulder point to wrist) - 13.5cm
- Leg length (from the waist point to ankle) - 25cm
- Eyeball size - 10-12mm
- Wig size - 6.5"
Narin dolls do not have a headcap as many other BJDs. They have a removable face plate. All heads are sold with these removable face plates. Narin was available with the following head/face plates:
- Classic Narin N401
- Normal Open-eyed Narin N403
- Sleeping Narin N401 SP released April 2018 limited 20
- 1/3 open Narin
- 2/3 open Narin N401, re-released April 2018 limited 20
- Narin Butterfly N411
- Narin Dreamer N415
- Narin Heartbreak N414 (same as Narae Heartbreak. face plate is unisex)
- Narin Tongue N41K
- Narin Dragonfly N413
The N60 series Narin classic body was first released in October 2005. The body had been on a 10 year hiatus and it was again released in October 2016 with reworked joints.
- Narin N60 Measurements
- Height: 60cm (head included)
- Chest circumference: 21.5cm (8.5" wig)
- Waist circumference: 21.2cm
- Hips circumference: 26.1cm
- Shoulder to shoulder: 12.5cm
- Arm length (no hands): 18.8cm
- Leg length: 32cm
- Foot length : 7.8cm
The N60 face plates:
- N609 Narin "Charisma"
- N613 Narin
- N61E Elf ears
- N61K Ver 1 1/3 open eyes normal
- N61K Ver 2 1/3 open eyes Vampire
Narin N65 pre-order was held December 2016, 10 years after last N60 release. The N65 body had slim pelvis and more musculature through chest, back, and arms. Based upon customer feedback Bimong began creating an N68 body.
- Height - 65cm 68cm
- Head circumference - 8.3inch
- Eyeball size - 12mm - 14mm
- Neck circumference - 11cm
- Shoulder width 16cm
- Foot length 9.5cm
Narae
The early heads for N40 Narae had an interesting feature. There was a hole in the back of the head which held a perfume sponge. There was a separate eye mechanism which was controlled by a magnet embedded in the right hand. When the hand was held up to her head it caused the eyes to swivel.
The N40 series Narae classic body had been the same since 2004. Bimong did refresh the molds and updated the knee and elbow joints for the January 2018 release.
- Narae N40 Measurements
- Height - 42cm (including head)
- Head circumference - 6.5"
- Neck circumference - 6.5cm
- Chest circumference - 16.8cm (Normal breast)
- Waist circumference - 12.5cm
- Hip circumference - 18.5cm
- Wrist circumference - 3.5cm
- Foot size - 5cm
- Ankle circumference - 5.5cm
- Arm length (from shoulder point to wrist) - 12.5cm
- Leg length (from the waist point to ankle) - 24.5cm
- Eyeball size - 10-12mm
- Wig size - 6.5"
Bimong sculpted a new N40 series body with improved joint mobility and aesthetics. Surface reinforcement parts between ball joints were added along with anti-slipping silicone pads. Bimong added 17 new parts including hidden pieces.
Bimong also modified the pelvis and knee joint by adding a tiny brake around joint. This allowed a greater range of flexibility as well as allowing the doll to stand more easily. This body was first made available with the November 2016 pre-order.
With this pre-order for the new N40 body Bimong offered an N410 head, fist hand, Meronica hand, high heeled feet, pointe feet, normal, and large breast.
- New Narae N40 Measurements
- Height - 43cm
- Head circumference - 6.5"
- Neck circumference - 6.5cm
- Shoulder width - 7cm (from shoulder end to end 8.5cm)
- Chest circumference - 17cm (small) 18cm (normal) 19cm (large)
- Waist circumference - 13cm
- Hip circumference - 21.5cm
- Arm length (from shoulder point to wrist) - 13cm
- Wrist circumference - 3.7cm
- Leg length (from waist point to ankle) - 25cm
- Length from groin to ankle - 20cm
- Ankle circumference - 5cm
- Eyeball size - 10mm
- Wig size - 6.5"
- Foot size - 5.5cm
Based upon further research and development Bimong again modified the new Narae N40 series body. The upgraded parts were wrist, ankle, pelvis, and knee joints. Inside the pelvis contains an exclusive silicone pad. This body was first released in September 2017.
January 2018 once again featured an upgraded triple-rail knee joints in an effort to produce a more aesthetic and natural pose. The pelvic silicone pads are bigger and the frictional force allows more stable posture. The wrist and ankle joints were made into one part creating a more natural line as well as additional detailing of the fingernails and toenails. Another major upgrade was the option of detachable removable breast plates. You could choose between small, medium, or large breast plates. This body was a limited edition of 100.
Narin dolls do not have a headcap as many other BJDs. They have a removable face plate. All heads are sold with these removable face plates. Narae was released with the following head/face plates:
- Classic Narae N402
- Normal open-eyed Narae N404
- Sleeping Narae N410
- 1/3 open Narae N408
- 2/3 open Narae N406
- Narae Butterfly N412
- Narae Dreamer N416
- Narae Heartbreak N414 (same as Narin Heartbreak. Faceplate is unisex).
- Narae Tongue N42K
- Narae Cat N42C - new limited 20
The N60 series was released in 2005 with the following measurements:
- Height: 57cm (head included)
- Chest circumference: 20.3cm (8" wig)
- Waist circumference: 17.5cm
- Hips circumference: 26.3cm
- Shoulder to shoulder: 11.5cm
- Arm length (no hands): 18cm
- Leg length: 31cm
- Foot length : 6.9cm
The N60 face plates:
- N610 Narae "Mature"
- N610 Narae sleep eyes
- N608 Narae 1/3 eyes open eyes
- N60S Narae
- N612 Narae
- N614 Narae
- N62K Narae1/3 eyes Vampire teeth
Discontinued/Limited Releases
2008
In 2008 Narindolls and Dollfair partnered for a limited release of 20 Captiva Narae for Florida IDEX, Captiva Island
Narindolls and Dollfair partnered to release an OOAK Narae to benefit the International Association for BJD Artists Workshop- Retreat 2008. This doll was the Holiday Narae from 2006 Doll Reader stored in vault for 2 yrs.
2010
Narindolls and Dollfair once again partnered to release 2 dolls for IDEX in Orlando January 2010. Bimong wrote a story of fallen angels Narae & Narin. Narae My Angel and Narin Fallen Angel were premiered at IDEX and featured in the Debut of Dolls magazine from Doll Reader.
On May 5, 2010 Bimong took part in a live internet chat with collectors on Dollfair's site. He debuted Neferti and Shahti.
2013
Bimong sculpted Shahti as a 16 inch BJD Fashion doll. This doll was sold through Jigamaree
2015
In September 2015 Bimong released Meronica. In addition to the new face plate she was released on a new double jointed 40cm body. This was the precursor to the new N40 body for Narae.
2016
Bimong had a giveaway drawing for reaching 1000 followers on Instagram. He offered an N404 head on a large breast body with faceup, custom wig, and glass eyes.
During the December 2016 N6X pre-order Bimong offered a Kiss head Narin and Narae couple. For customers choosing a Narin they will receive the Narin Kiss head, plus Vampire and Human teeth parts, and 4 tongue parts. For customers choosing a Narae they will receive the Narae Kiss head, plus Vampire and Human teeth parts, and 4 tongue parts.
2017
Bimong had a giveaway drawing for reaching 3000 followers on Instagram. He offered a Real Skin Narin N411 head on Version 2 classic body and a Real Skin Narae N412 head on classic body.
2018
Release Narin N401-SP sleeping head with 20 limited edition, release Narin40 N401-2/3 open eyes head with 20 limited edition, and release Narae60 N60S sleeping head Limited 20.