-
It has come to the attention of forum staff that Dollshe Craft has ceased communications with dealers and customers, has failed to provide promised refunds for the excessive waits, and now has wait times surpassing 5 years in some cases. Forum staff are also concerned as there are claims being put forth that Dollshe plans to close down their doll making company. Due to the instability of the company, the lack of communication, the lack of promised refunds, and the wait times now surpassing 5 years, we strongly urge members to research the current state of this company very carefully and thoroughly before deciding to place an order. For more information please see the Dollshe waiting room. Do not assume this cannot happen to you or that your order will be different.Dismiss Notice
-
Dollshe Craft and all dolls created by Dollshe, including any dolls created under his new or future companies, including Club Coco BJD are now banned from Den of Angels. Dollshe and the sculptor may not advertise his products on this forum. Sales may not be discussed, no news threads may be posted regarding new releases. This ban does not impact any dolls by Dollshe ordered by November 8, 2023. Any dolls ordered after November 8, 2023, regardless of the date the sculpt was released, are banned from this forum as are any dolls released under his new or future companies including but not limited to Club Coco BJD. This ban does not apply to other company dolls cast by Dollshe as part of a casting agreement between him and the actual sculpt or company and those dolls may still be discussed on the forum. Please come to Ask the Moderators if you have any questions.Dismiss Notice
Difference between revisions of "Bobobie 43cm (40-44cm)"
ShadowLink (Talk | contribs) (→About) |
(→Sculpts by ResinSoul) |
||
| (13 intermediate revisions by 4 users not shown) | |||
| Line 1: | Line 1: | ||
==About== | ==About== | ||
| − | [[Bobobie]] and [[ResinSoul]]'s 1/4 scale dolls range from 40cm to 44cm in height depending on which body type and head sculpt is selected. Bobobie offers mature and immature female bodies and a male body; ResinSoul offers single-jointed (slim mature) and double-jointed female bodies (Rong's mature and Li's immature) | + | [[Bobobie]] and [[ResinSoul]]'s 1/4 scale dolls range from 40cm to 44cm in height depending on which body type and head sculpt is selected. Bobobie offers mature and immature female bodies and a male body; ResinSoul offers single-jointed (slim mature) and double-jointed female bodies (Rong's mature and Li's immature), two male bodies (single-jointed and Wu's double-jointed body), and both a female and male beast-legged body. Each company offers human and elf-eared sculpts; additionally, ResinSoul offers mermaid-ear sculpts, one fanged doll, and horns. |
Bobobie female bodies fit most clothes designed for mature or immature (accordingly) MSD sized dolls. The ResinSoul female body, which is smaller and thinner, fits most clothes designed for slim mature dolls, and some clothes designed for 1/4 scale fashion dolls such as those made by Tonner. | Bobobie female bodies fit most clothes designed for mature or immature (accordingly) MSD sized dolls. The ResinSoul female body, which is smaller and thinner, fits most clothes designed for slim mature dolls, and some clothes designed for 1/4 scale fashion dolls such as those made by Tonner. | ||
| − | ResinSoul female dolls in this range can be listed as 40cm or 42cm in height; however, with the exception of | + | ResinSoul female dolls in this range can be listed as 40cm or 42cm in height; however, with the exception of the dolls listed on the "42cm doll-02", these dolls use the same original RS 1/4 body as default. The different heights are accounted for by the different sizes of the head sculpts. The "42cm doll-02" dolls come on the slightly larger, double jointed bodies by default. |
==Sculpts== | ==Sculpts== | ||
| Line 30: | Line 30: | ||
* [[ResinSoul Mei | Fei]] | * [[ResinSoul Mei | Fei]] | ||
* [[ResinSoul Ju | Ju]] | * [[ResinSoul Ju | Ju]] | ||
| − | |||
* [[ResinSoul Lan | Lan]] | * [[ResinSoul Lan | Lan]] | ||
* [[ResinSoul Li | Li]] | * [[ResinSoul Li | Li]] | ||
* [[ResinSoul Lu | Lu]] | * [[ResinSoul Lu | Lu]] | ||
* [[ResinSoul Mei | Mei]] | * [[ResinSoul Mei | Mei]] | ||
| − | * [[ResinSoul Rong |Rong]] | + | * [[ResinSoul Rong | Rong]] |
* [[ResinSoul Mei | Ya]] | * [[ResinSoul Mei | Ya]] | ||
* [[ResinSoul Yao | Yao]] (has hooves and horns) | * [[ResinSoul Yao | Yao]] (has hooves and horns) | ||
| + | * [[ResinSoul Qing | Qing]] | ||
'''Male Sculpts''' | '''Male Sculpts''' | ||
| − | * [[ResinSoul An |An]] | + | * [[ResinSoul An | An]] |
| − | * [[ResinSoul | + | * [[ResinSoul Mai | Mai]] |
| + | * [[ResinSoul Jun | Jun]] | ||
* [[ResinSoul Song | Song]] | * [[ResinSoul Song | Song]] | ||
* [[ResinSoul Wu | Wu]] | * [[ResinSoul Wu | Wu]] | ||
| − | * [[ResinSoul Iruhi|Iruhi]] | + | *[[ResinSoul Ming | Ming]] |
| + | *[[ResinSoul Seng | Seng]] | ||
| + | *[[ResinSoul Han | Han]] | ||
| + | |||
| + | [[FeatherFall Iruhi | Iruhi]] - while sculpted by ResinSoul, Iruhi was designed by FeatherFall, and they retain all rights to and exclusive sale of him. He is often mislabeled as a ResinSoul doll as he could be ordered with any of the ResinSoul bodies. As FeatherFall is now out of business, Iruhi is no longer available. | ||
==Body measurements and features== | ==Body measurements and features== | ||
| Line 91: | Line 96: | ||
'''Double-jointed Male Body''' | '''Double-jointed Male Body''' | ||
| − | This body is default with Wu. | + | This body is default with Wu and Seng. This body can also feature hooves like with Ming. |
HEIGHT 44cm, ARM LENGTH 12cm, LEG LENGTH 24cm, FOOT LENGTH 5.5cm, NECK SIZE 7.5cm, SHOULDER WIDTH 8.5cm, CHEST 17.5cm, WAIST 13.5cm, HIP 18.5cm | HEIGHT 44cm, ARM LENGTH 12cm, LEG LENGTH 24cm, FOOT LENGTH 5.5cm, NECK SIZE 7.5cm, SHOULDER WIDTH 8.5cm, CHEST 17.5cm, WAIST 13.5cm, HIP 18.5cm | ||
| + | |||
| + | '''Optional parts''' | ||
| + | |||
| + | ResinSoul offers high-heeled feet for their 58cm and 42cm girl bodies. There are also hooved beast or faun legs, large and small female busts, three different types of horns, and eight differently sculpted MSD hand options. | ||
===Default body types and hybridizing between the companies=== | ===Default body types and hybridizing between the companies=== | ||
| − | By default, Bobobie and ResinSoul dolls with come with bodies from their own company; however, ResinSoul dolls ordered from Bobobie’s web page can be requested with Bobobie bodies, and vice versa. Bobobie heads and bodies are not available from ResinSoul. Some dealers, however, that stock dolls from both companies will label dolls from both companies as Bobobie dolls, which can cause some confusion. In that case, the default body will be determined by headsculpt; all ResinSoul head sculpts | + | By default, Bobobie and ResinSoul dolls with come with bodies from their own company; however, ResinSoul dolls ordered from Bobobie’s web page can be requested with Bobobie bodies, and vice versa. Bobobie heads and bodies are not available from ResinSoul. Some dealers, however, that stock dolls from both companies will label dolls from both companies as Bobobie dolls, which can cause some confusion. In that case, the default body will be determined by headsculpt; for example, all ResinSoul female head sculpts except [[ResinSoul Rong|Rong]], [[ResinSoul Li|Li]], and [[ResinSoul Yao|Yao]] will come with the original single-jointed ResinSoul body; Rong will come with the double-jointed ResinSoul body, Li the "immature" or small-breasted version of the double-jointed body, and Yao with the hoofed body. All original Bobobie sculpts will come with a Bobobie body, although dealers may be able to pre-order the body a customer prefers. [[Bobobie Sprite|Sprite]] is the only doll which defaults to the immature Bobobie body. |
| − | It should be noted, however, that the Bobobie ¼ female bodies are distinctly larger than the single-jointed Resinsoul ¼ bodies, and that the double-jointed Resinsoul ¼ body has a larger neck hole than the other bodies, so differences in scale will be apparent. [[ResinSoul Lan|Lan]] and [[ResinSoul Lu|Lu]] have the smallest heads in this scale, and will not hybridize well with the larger bodies; [[Bobobie Pixie|Pixie]] and [[Bobobie Tiah|Tiah]] have the largest female heads, and may have the opposite problem when combined with the slighter ResinSoul body. Each company will also gender-swap bodies on request, although the same disclaimer applies to Lan and Lu. | + | It should be noted, however, that the Bobobie ¼ female bodies are distinctly larger than the single-jointed Resinsoul ¼ bodies, and that the double-jointed Resinsoul ¼ body has a larger neck hole than the other Resinsoul bodies, so differences in scale will be apparent. [[ResinSoul Lan|Lan]] and [[ResinSoul Lu|Lu]] have the smallest heads in this scale, and will not hybridize well with the larger bodies; [[Bobobie Pixie|Pixie]] and [[Bobobie Tiah|Tiah]] have the largest female heads, and may have the opposite problem when combined with the slighter ResinSoul body. Each company will also gender-swap bodies on request, although the same disclaimer applies to Lan and Lu. |
== Company Website == | == Company Website == | ||
Latest revision as of 18:47, 26 June 2013
Contents
About
Bobobie and ResinSoul's 1/4 scale dolls range from 40cm to 44cm in height depending on which body type and head sculpt is selected. Bobobie offers mature and immature female bodies and a male body; ResinSoul offers single-jointed (slim mature) and double-jointed female bodies (Rong's mature and Li's immature), two male bodies (single-jointed and Wu's double-jointed body), and both a female and male beast-legged body. Each company offers human and elf-eared sculpts; additionally, ResinSoul offers mermaid-ear sculpts, one fanged doll, and horns.
Bobobie female bodies fit most clothes designed for mature or immature (accordingly) MSD sized dolls. The ResinSoul female body, which is smaller and thinner, fits most clothes designed for slim mature dolls, and some clothes designed for 1/4 scale fashion dolls such as those made by Tonner.
ResinSoul female dolls in this range can be listed as 40cm or 42cm in height; however, with the exception of the dolls listed on the "42cm doll-02", these dolls use the same original RS 1/4 body as default. The different heights are accounted for by the different sizes of the head sculpts. The "42cm doll-02" dolls come on the slightly larger, double jointed bodies by default.
Sculpts
Sculpts by Bobobie
Female sculpts
Male sculpts
Sculpts by ResinSoul
Female Sculpts
Male Sculpts
Iruhi - while sculpted by ResinSoul, Iruhi was designed by FeatherFall, and they retain all rights to and exclusive sale of him. He is often mislabeled as a ResinSoul doll as he could be ordered with any of the ResinSoul bodies. As FeatherFall is now out of business, Iruhi is no longer available.
Body measurements and features
Bobobie bodies
Female mature body
This body features double-jointed knees, single-jointed elbows, and a three-part mature torso. It fits clothing intended for mature MSD sized dolls. It is the default body for the Tiah, Pixie and Bobie sculpts.
Overall Height:43cm, Neck Circumference: 7cm, Shoulder Width: 9cm, Arm Length: 12cm, Body Length: 10cm, Chest Circumference: 19cm, Bottom Circumference:17.5cm, Leg Length: 21cm, Feet Length: 5.5cm
Female immature body
This body features double-jointed knees, single-jointed elbows, and a three-part immature torso. It fits clothing intended for immature MSD sized dolls. It is the default body for the Sprite sculpt.
Overall Height:43cm, Neck Circumference: 7cm, Shoulder Width: 9cm, Arm Length: 12cm, Body Length: 10cm, Chest Circumference: ?, Bottom Circumference:17.5cm, Leg Length: 21cm, Feet Length: 5.5cm
Male body
This body is default for the Tony sculpt.
Overall Height: 43cm, Head Diameter: 6.5cm, Neck Circumference: 7cm, Shoulder Width: 9cm, Arm Length: 13cm, Body Length: 10cm, Chest Circumference: 17cm, Bottom Circumference:17.5cm, Leg Length: 21cm, Feet Length: 5.5cm
ResinSoul bodies
Single-jointed Female Body
This is a single-jointed body. It fits clothing intended for some slim MSD dolls, as well as some clothing intended for 40cm fashion dolls. It is the default body for the Mei, Fei, Ju, Lu and Lan sculpts.
Height 42cm, Arm Length 11cm, Leg Length 20.5cm, Head Size 17cm, Neck Size 6cm, Shoulder Width 7.5cm, Chest 15.5cm, Waist 11cm, Hip 17cm, Foot Length 5.2cm
Double-jointed Female-Body
This is a double-jointed body. The neck-hole is larger than the original body. It is the default body for the Rong sculpt. An immature bust body was released with Li. This body can also feature hooves like with Yao.
Height 42CM, Arm length 11.5CM, Leg length EG 21CM, Foot length 5.5CM, Head size 19CM, Neck size 8CM, Shoulder width 7.5CM, Chest 17CM, Waist 13CM, Hip 19CM
Single-jointed Male Body
This body is default for the An, Jun, Mai and Song sculpts.
HEIGHT 44cm, ARM LENGTH 12cm, LEG LENGTH 24cm, FOOT LENGTH 5.5cm, NECK SIZE 7.5cm, SHOULDER WIDTH 8.5cm, CHEST 17.5cm, WAIST 13.5cm, HIP 18.5cm
Double-jointed Male Body
This body is default with Wu and Seng. This body can also feature hooves like with Ming.
HEIGHT 44cm, ARM LENGTH 12cm, LEG LENGTH 24cm, FOOT LENGTH 5.5cm, NECK SIZE 7.5cm, SHOULDER WIDTH 8.5cm, CHEST 17.5cm, WAIST 13.5cm, HIP 18.5cm
Optional parts
ResinSoul offers high-heeled feet for their 58cm and 42cm girl bodies. There are also hooved beast or faun legs, large and small female busts, three different types of horns, and eight differently sculpted MSD hand options.
Default body types and hybridizing between the companies
By default, Bobobie and ResinSoul dolls with come with bodies from their own company; however, ResinSoul dolls ordered from Bobobie’s web page can be requested with Bobobie bodies, and vice versa. Bobobie heads and bodies are not available from ResinSoul. Some dealers, however, that stock dolls from both companies will label dolls from both companies as Bobobie dolls, which can cause some confusion. In that case, the default body will be determined by headsculpt; for example, all ResinSoul female head sculpts except Rong, Li, and Yao will come with the original single-jointed ResinSoul body; Rong will come with the double-jointed ResinSoul body, Li the "immature" or small-breasted version of the double-jointed body, and Yao with the hoofed body. All original Bobobie sculpts will come with a Bobobie body, although dealers may be able to pre-order the body a customer prefers. Sprite is the only doll which defaults to the immature Bobobie body.
It should be noted, however, that the Bobobie ¼ female bodies are distinctly larger than the single-jointed Resinsoul ¼ bodies, and that the double-jointed Resinsoul ¼ body has a larger neck hole than the other Resinsoul bodies, so differences in scale will be apparent. Lan and Lu have the smallest heads in this scale, and will not hybridize well with the larger bodies; Pixie and Tiah have the largest female heads, and may have the opposite problem when combined with the slighter ResinSoul body. Each company will also gender-swap bodies on request, although the same disclaimer applies to Lan and Lu.
